주요학술논문

• Effect of CaO Addition on Microstructural Evolution Due to the Annealing of AZ31 Alloys Processed by Equal-Channel Angular Pressing (ECAP), METALS, 13권, pp. 1356-1~1356-15, 2023
• Effects of intermediate annealing time on texture evolution during multi-pass cold-shear-straining of an Al-Mg-Si-Cu alloy, JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 24권, pp. 6000~6008, 2023
• Optimization of Roller Forming Depth for Splined Mandrel Flow Forming, Transactions of the Korean Society of Mechanical Engineers, A, 47권,4호, pp. 347~353, 2023
• 플로우포밍 스플릿 공정 시 맨드릴의 응력 해석을 통한 파손 원인 분석, 소성가공, 31권,6호, pp. 384~393, 2022
• Dislocation characteristics and dynamic recrystallization in hot deformed AM30 and AZ31 alloys, Journal of Magnesium and Alloys, 10권,12호, pp. 3495~3505, 2022
• Microstructural and mechanical properties of AISI 440C stainless steel fabricated using selective laser melting, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 860권, pp. 144259, 2022
• Study on the effect of preheating temperature of SLM process on characteristics of CoCrMo alloy, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 841권, 2022
• Effect of Nickel Silicide Content on the Friction Properties of Wet Sintered Friction Material, KOREAN JOURNAL OF METALS AND MATERIALS, 60권,2호, pp. 95~101, 2022
• FEM을 이용한 셀프 피어싱 리벳 냉간압조 해석, 한국생산제조학회지, 31권,1호, pp. 19~27, 2022
• Effects of complex strain conditions on macroscopic deformation behavior in basal plane of Mg alloy, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 833권, 2022
• 디지털 뿌리명장 교육센터 추진 현황, 한국주조공학회지, 41권,6호, pp. 561~564, 2021
• Effect of Mg content on the dislocation characteristics and discontinuous dynamic recrystallization during the hot deformation of Al-Mg alloy, JOURNAL OF ALLOYS AND COMPOUNDS, 887권, pp. 161397-1~161397-9, 2021
• Microstructure and Mechanical Properties of Cast and Hot-Rolled Medium-Carbon Steels under Isothermal Heat-Treatment Conditions, METALS, 11권,12호, 2021
• Strain rate effects on microstructure and texture evolution in cold-sheared Al-6 Mg alloys during low-temperature annealing, JOURNAL OF ALLOYS AND COMPOUNDS, 889권, 2021
• STUDY ON RECOVERY OF VALUABLE METALS IN SPENT LITHIUM-ION BATTERIES BY Al2O3-SiO2-CaO-Fe2O3 SLAG SYSTEM, ARCHIVES OF METALLURGY AND MATERIALS, 66권,4호, pp. 983~986, 2021
• The influence of porosity and pore shape on the thermal conductivity of silver sintered joint for die attach, Materials Today Communications, 29권, pp. 102772-1~102772-10, 2021
• Strain Distributions of Plane-Strained and Simple-Sheared Al-Mg Alloy, METALS AND MATERIALS INTERNATIONAL, 27권,11호, pp. 4894~4899, 2021
• High-Entropy Alloys Properties Prediction Model by Using Artificial Neural Network Algorithm, METALS, 11권,10호, 2021
• Characterization of palladium electrodeposition in ammonia-free electrolyte with additives, SURFACE AND INTERFACE ANALYSIS, 2021
• Effect of thermo-mechanical treatment and strontium addition on workability and mechanical properties of Al-Si-Cu casting alloy, MATERIALS CHARACTERIZATION, 178권, 2021
• Impact of Thermal Cycling on Cu Press-Fit Connector Pin Interconnect Mechanical Stability, JOURNAL OF ELECTRONIC MATERIALS, 50권,8호, pp. 4991~4998, 2021
• Mechanical behaviors of lotus-type porous Cu/Cu joint soldered by Sn-3.0Ag-0.5Cu alloy, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 822권, 2021
• Al/Fe 이종재의 마이크로 마찰교반 맞대기용접 적용성 평가, 대한용접접합학회지, 39권,3호, pp. 246~253, 2021
• Comprehensive Analysis of the Microstructure and Mechanical Properties of Friction-Stir-Welded Low-Carbon High-Strength Steels with Tensile Strengths Ranging from 590 MPa to 1.5 GPa, APPLIED SCIENCES-BASEL, 11권,12호, 2021
• Effect of electric current on the microstructural refinement of pure aluminum, JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 12권, pp. 818~830, 2021
• Electrochemical performance of the spinel NiCo2O4 based nanostructure synthesized by chemical bath method for glucose detection, APPLIED SURFACE SCIENCE, 545권, pp. 148927-1~148927-5, 2021
• Characterization of Interfacial Microstructure of Cast Iron Inserts Dipping in Aluminum Alloy Melt, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 21권,3호, pp. 2010~2014, 2021
• Effect of a High Mg Solute Content on the Hot Workability of Al-Mg Alloys, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 21권,3호, pp. 1990~1995, 2021
• Microstructure and Mechanical Properties of Commercially Pure Ti/Steel Joint Brazed by Zr-Ti-Ni Amorphous Filler Metal, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 21권,3호, pp. 2051~2054, 2021
• Hot Compression Behavior of New Al-6Mg and Al-8Mg Alloy with Improved Hot Workability Fabricated by Direct Chill Casting Method, METALS, 11권,2호, pp. 288-1~288-11, 2021
• Modeling of Laser Welds Using Machine Learning Algorithm Part I: Penetration Depth for Laser Overlap Al/Cu Dissimilar Metal Welds, 대한용접접합학회지, 39권,1호, pp. 27~35, 2021
• Modeling of Laser Welds Using Machine Learning Algorithm Part II: Geometry and Mechanical Behaviors of Laser Overlap Welded High Strength Steel Sheets, 대한용접접합학회지, 39권,1호, pp. 36~44, 2021
• Preventing Evaporation Products for High-Quality Metal Film in Directed Energy Deposition: A Review, METALS, 11권,2호, 2021
• Review on the Recent Welding Research with Application of CNN-based Deep Learning Part 1: Models and Applications, 대한용접접합학회지, 39권,1호, pp. 10~19, 2021
• Review on the Recent Welding Research with Application of CNN-based Deep Learning Part II: Model Evaluation and Visualizations, 대한용접접합학회지, 39권,1호, pp. 20~26, 2021
• Effect of process parameters for selective laser melting with SUS316L on mechanical and microstructural properties with variation in chemical composition, MATERIALS & DESIGN, 197권, 2021
• Synthesis of NiCo2O4 Nanostructures and Their Electrochemial Properties for Glucose Detection, NANOMATERIALS, 11권,1호, pp. 55-1~55-12, 2021
• Forgeability assessment of Al-6 wt%Mg alloy using biaxial alternate forging, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 286권, pp. 116822, 2020
• Periodic formations of deformation twins and dislocation arrays via grain boundary sliding at serrated grain boundary in cold-shear-strained AZ31 alloy, INTERNATIONAL JOURNAL OF PLASTICITY, 135권, pp. 102815, 2020
• EFFECT OF Mg RATIO ON THE EXTRACTION OF Dy FROM (Nd,Dy)-Fe-B PERMANENT MAGNET USING LIQUID Mg, ARCHIVES OF METALLURGY AND MATERIALS, 65권,4호, pp. 1281~1285, 2020
• MICROSTRUCTURE AND MECHANICAL PROPERTIES OF HOT-DEFORMED AIMg4 ALLOYS WITH THE VARIATIONS OF Mn, Fe, AND Si CONTENTS, ARCHIVES OF METALLURGY AND MATERIALS, 65권,4호, pp. 1255~1259, 2020
• Effects of Particle Size on the NO(2)Gas Sensing Properties of NiO Nanoparticle-Decorated SnO(2)Nanorods, JOURNAL OF THE KOREAN PHYSICAL SOCIETY, 77권,6호, pp. 482~488, 2020
• CO Sensing Properties of Chemiresistive In2O3/SnO2 Composite Nanoparticle Sensors, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 20권,7호, pp. 4344~4348, 2020
• Effect of Surface Roughness on Crystal Size of Manganese Phosphate Coating of Carbon Steel, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 20권,7호, pp. 4312~4317, 2020
• PREDICTION OF HIGH STRAIN RATE FLOW BEHAVIOR OF 7175 ALUMINUM ALLOY BASED ON ARRHENIUS-TYPE CONSTITUTIVE EQUATIONS, ARCHIVES OF METALLURGY AND MATERIALS, 65권,4호, pp. 1361~1364, 2020
• Causes and Measures of Fume in Directed Energy Deposition: A Review, KOREAN JOURNAL OF METALS AND MATERIALS, 58권,6호, pp. 383~396, 2020
• Effect of Interface Microstructure on Joint Strength of Zirconia/Titanium Alloy Brazed with Amorphous Zr-Ti-Ni-Cu Active Filler Metal, METALS, 10권,6호, pp. 718-1~718-9, 2020
• Effect of Mg content on shear texture evolution at variable processing conditions in Al-Mg alloys, JOURNAL OF ALLOYS AND COMPOUNDS, 825권, 2020
• Effect of the Mg contents on the annealing mechanism and shear texture of Al-Mg alloys, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 786권, 2020
• Microstructure and Charpy Impact Properties of FCAW and SAW Heat Affected Zones of 100 mm Thick Steel Plate for Offshore Platforms, METALS AND MATERIALS INTERNATIONAL, 26권,6호, pp. 867~881, 2020
• Optimal Composition of ZnO/WO3 Composite Nanoparticle Gas Sensors, PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, 217권,12호, pp. 1900874-1~1900874-8, 2020
• Pore characteristics of Lotus-Type Porous Copper Fabricated by Centrifugal Casting, METALS AND MATERIALS INTERNATIONAL, 26권,5호, pp. 660~667, 2020
• 가변극성을 이용한 알루미늄 5183 와이어의 아크 적층 공정에서 EP/EN 비율의 영향 평가, 대한용접접합학회지, 38권,2호, pp. 180~186, 2020
• Effects of high Mg content and processing parameters on Portevin-Le Chatelier and negative strain rate sensitivity effects in Al-Mg alloys, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 779권, 2020
• Mechanism of grain boundary serration during hot deformation of AZ31 alloy: Role of grain boundary dislocations and grain boundary sliding, INTERNATIONAL JOURNAL OF PLASTICITY, 125권, pp. 118~132, 2020
• Sensitivities of a 6:4 (by molar ratio) ZnO/WO3 composite nanoparticle sensor to reducing and oxidizing gases, APPLIED SURFACE SCIENCE, 504권, pp. 144104-1~144104-10, 2020
• Deformation banding and static recrystallization in high-strain-rate-torsioned Al-Mg alloy, JOURNAL OF ALLOYS AND COMPOUNDS, 814권, 2020
• Dislocation Structure in Hot Deformed Al-Zn-Mg Alloy by X-ray Line Profile Analysis, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 20권,1호, pp. 177~182, 2020
• Enhancement of the bonding strength of Al2O3 ceramics using a reactive intermediate layer formed by aerosol deposition, JOURNAL OF ASIAN CERAMIC SOCIETIES, 8권,1호, pp. 65~71, 2020
• Thermal Properties of Plasma-Sprayed Multilayer Al2O3/Yttria-Stabilized Zirconia Coating, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 20권,1호, pp. 524~529, 2020
• 고함량의 Mg을 함유한 Al-Mg 합금의 이축교번단조 변형에 따른 미세조직 및 인장특성 변화, 소성가공, 28권,6호, pp. 361~367, 2019
• Heat Treatment Map of Al2Ca-added AlSi11MnMg Pressure-Cast Alloy Plotted by Full Factorial Design of Experiment and Analysis of Variance, METAL SCIENCE AND HEAT TREATMENT, 61권,7-8, pp. 511~516, 2019
• EFFECT OF SURFACE TREATMENTS ON CAST-BONDING CHARACTERISTICS OF STEEL-ALUMINUM HYBRID COMPOSITE MATERIALS, ARCHIVES OF METALLURGY AND MATERIALS, 64권,3호, pp. 889~892, 2019
• FABRICATION OF 4N5 GRADE TANTALUM WIRE FROM TANTALUM SCRAP BY EBM AND DRAWING, ARCHIVES OF METALLURGY AND MATERIALS, 64권,3호, pp. 935~941, 2019
• Influence of the distribution of nanoparticles on the NO2 sensing properties of SnO2 nanorods decorated with CaO and Pt, JOURNAL OF ALLOYS AND COMPOUNDS, 802권, pp. 649~659, 2019
• Effect of Surface Activation Agents on Manganese Phosphate Coating of Carbon Steel, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 19권,7호, pp. 4188~4194, 2019
• Evaluation of Hot Deformation and Dynamic Recrystallization Behaviors of Advanced Reduced-Activated Alloy (ARAA), METALS AND MATERIALS INTERNATIONAL, 25권,4호, pp. 888~899, 2019
• Precipitate transformation of tau-AlMn phases to Al8Mn4Ca during solution heat treatment of CaO-added AZ31 alloys, MATERIALS CHARACTERIZATION, 151권, pp. 368~377, 2019
• Evaluation of the Hot Workability of Commercially Pure Ti Using Hot Torsion Tests, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 19권,3호, pp. 1772~1776, 2019
• High Temperature Deformation Characteristics of Al-Zn-Mg Alloy Modified with CaO-Added Mg, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 19권,3호, pp. 1724~1728, 2019
• Influence of the Sintering Temperature of Al-Doped Higher Manganese Silicide for Improved Thermoelectric Properties, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 19권,3호, pp. 1699~1703, 2019
• Intermetallic Growth Mechanism and Mechanical Properties of Post-Annealed SAC305 Solder Joints on Cu-Based Electrode Interfaces, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 19권,3호, pp. 1645~1648, 2019
• Microstructural and Mechanical Characteristics of A356 Alloys as a Function of Mn Content and Cast Thickness, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 19권,3호, pp. 1704~1708, 2019
• Thermoelectric Properties of Cu-Doped Bi2Te2.7Se0.3 Fabricated by Hot Pressing, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 19권,3호, pp. 1533~1537, 2019
• 염화동 폐액으로부터 양이온격막 전해 채취된 구리 분말을 이용한 황산동의 제조방법 연구, 자원리싸이클링, 28권,1호, pp. 62~72, 2019
• Hot deformation behavior of AA6005 modified with CaO-added Mg at high strains, JOURNAL OF ALLOYS AND COMPOUNDS, 774권, pp. 1081~1091, 2019
• Removal of Mg and MgO By-Products through Magnesiothermic Reduction of Ti Powder in Self-Propagating High-Temperature Synthesis, METALS, 9권,2호, 2019
• Effects of CaO addition and strain rate on the texture evolution of AZ31 alloy, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 744권, pp. 724~732, 2019
• Room Temperature Bonding on Interface Between Metal and Ceramic, JOURNAL OF ELECTRONIC MATERIALS, 48권,1호, pp. 72~78, 2019
• Mechanical Properties and Very High Cycle Fatigue Behavior of Peak-Aged AA7021 Alloy, METALS, 8권,12호, 2018
• 니켈 MHP로부터 제조된 염화니켈을 이용한 탄산니켈 제조연구, 자원리싸이클링, 27권,5호, pp. 23~29, 2018
• 주조 상태 및 용체화처리한 AZ91-4%RE 마그네슘 합금의부식 거동, 열처리공학회지, 31권,5호, pp. 1~11, 2018
• 다중 반응표면분석법을 이용한 980MPa급 GA강판의 저항 점 용접조건 최적화, 대한용접접합학회지, 36권,4호, pp. 63~69, 2018
• Effects of calcination temperature on the UV light emission of CaO-decorated ZnO nanorods, APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 124권,6호, pp. 455-1~455-6, 2018
• Evaluation of hot deformation characteristics in modified AA5052 using processing map and activation energy map under deformation heating, JOURNAL OF ALLOYS AND COMPOUNDS, 740권, pp. 96~108, 2018
• Selective Detection of a Reducing Gas Using WO3-Decorated ZnO Nanorod-Based Sensor in the Presence of Oxidizing Gases, PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, 215권,20호, 2018
• Development of defects in ZnO/RGO composites under wet chemical synthesis, OPTIK, 156권, pp. 549~555, 2018
• Effect of the Spray Distance on the Properties of High Velocity Oxygen-Fuel (HVOF) Sprayed WC-12Co Coatings, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 18권,3호, pp. 1931~1934, 2018
• Effect of Zn on Pore Characteristics in Lotus-Type Porous Cu, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 18권,3호, pp. 2227~2230, 2018
• Effects of Heat Treatment on Interfacial Behavior and Bonding Strength of Surface Activated Bonding Ti-Al Laminate, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 18권,3호, pp. 1847~1850, 2018
• Hot Deformation Behavior of Hot-Extruded AA7175 Through Hot Torsion Tests, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 18권,3호, pp. 2144~2147, 2018
• Microstructure and Density of Sintered ZnO Ceramics Prepared by Magnetic Pulsed Compaction, ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2018권, pp. 1~7, 2018
• Pore Characteristics of Lotus-Type Porous Cu-Fe and Cu-Cr Alloys Fabricated by Unidirectional Solidification, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 18권,3호, pp. 2262~2265, 2018
• Preparation and Properties of WC-Based Alloy Coatings with Controlled Co and Cr via High Velocity Oxy-Fuel Spray Technique, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 18권,3호, pp. 2049~2053, 2018
• 전자기 연속 주조법을 이용한 의료용 타이타늄 합금 제작에 관한 연구, 한국주조공학회지, 38권,1호, pp. 9~15, 2018
• Effect of the Manganese Phosphate Solution with Additive Agent of Tartaric Acid, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 18권,2호, pp. 1152~1157, 2018
• Effects of annealing temperature on the H-2-sensing properties of Pd-decorated WO3 nanorods, APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 124권,3호, 2018
• Cr2O3 nanoparticle-functionalized WO3 nanorods for ethanol gas sensors, APPLIED SURFACE SCIENCE, 432권, pp. 241~249, 2018
• APT(S) 제조 시 전기투석법을 이용한 H2WO4(Aq)내의 Na 제거 방법에 관한 연구, 자원리싸이클링, 26권,6호, pp. 65~72, 2017
• Effect of Misch Metal Addition on Lattice Strain and Physical Properties of Gas-Atomized Cu-Fe-Mm System, SCIENCE OF ADVANCED MATERIALS, 9권,12호, pp. 2142~2146, 2017
• Comparison of structural and optical properties of TeO2 nanostructures synthesized using various substrate conditions, METALS AND MATERIALS INTERNATIONAL, 23권,6호, pp. 1133~1138, 2017
• 단락제어에 따른 입향상진 피복아크 용접 특성에 관한 연구, 대한용접접합학회지, 35권,5호, pp. 23~28, 2017
• 방전플라즈마 소결법으로 제조된 Ta-Cu의 미세조직 및전기접점 특성, 한국분말야금학회지, 24권,5호, pp. 377~383, 2017
• Effect of Iridium and Rhodium on High-Temperature Volatilization Behavior of Platinum Alloys, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 17권,10호, pp. 7756~7759, 2017
• Enhanced Ethanol Gas Sensing Performance of the Networked Pd, In2O3-Codecorated ZnO Nanorod Sensor, JOURNAL OF THE KOREAN PHYSICAL SOCIETY, 71권,8호, pp. 494~499, 2017
• Ultraintense UV emission from ZnO-sheathed ZnS nanorods, SCIENTIFIC REPORTS, 7권, 2017
• Ethanol gas sensing using a networked PbO-decorated SnO2 nanowires, THIN SOLID FILMS, 637권,SpecialSI, pp. 21~26, 2017
• Characterization and optical properties of TeO2/ZnO nanocomposites synthesized in a narrow temperature range, MATERIALS RESEARCH EXPRESS, 4권,8호, 2017
• Effect of Surface Activated Bonding on Adhesion Strength Between Al and Al2O3, NANOSCIENCE AND NANOTECHNOLOGY LETTERS, 9권,8호, pp. 1217~1221, 2017
• InP 코어 합성온도에 따른 InP/ZnS의 코어/쉘 양자점의 발광특성, 한국분말야금학회지, 24권,4호, pp. 321~325, 2017
• Emission of SiOx Nanowires Resulting from Pressure Changes in a Closed System Comparable to a Tungsten Electron Gun at a High Voltage, NANO, 12권,7호, 2017
• Cu-Sn and Ni-Sn transient liquid phase bonding for die-attach technology applications in high-temperature power electronics packaging, JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 28권,11호, pp. 7827~7833, 2017
• FABRICATION OF A SPHERICAL TITANIUM POWDER BY COMBINED COMBUSTION SYNTHESIS AND DC PLASMA TREATMENT, ARCHIVES OF METALLURGY AND MATERIALS, 62권,2호, pp. 1057~1062, 2017
• Prominent Gas Sensing Performance of TiO2-Core/NiO-Shell Nanorod Sensors, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 17권,6호, pp. 4099~4102, 2017
• REACTION KINETICS AND MORPHOLOGICAL STUDY OF TiNb2O7 SYNTHESIZED BY SOLID-STATE REACTION, ARCHIVES OF METALLURGY AND MATERIALS, 62권,2호, pp. 1051~1056, 2017
• Hot deformation characteristics of CaO-added AZ31 based on kinetic models and processing maps, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 695권, pp. 379~385, 2017
• Microstructural Evolution of AlMg4.5 and High-Mg Containing AlMg10 Alloys during Solidification and Homogenization Treatment, APPLIED MECHANICS AND MATERIALS, 864권, pp. 106~110, 2017
• Performance of Alkali-Resistant Glass Fibers Modified with Refused Coal Ore, MATERIALS TRANSACTIONS, 58권,5호, pp. 705~710, 2017
• Preparation of Cu nanoparticles with controlled particle size and distribution via reaction temperature and sonication, SURFACE AND INTERFACE ANALYSIS, 49권,5호, pp. 405~409, 2017
• Physical Properties of AR-Glass Fibers in Continuous Fiber Spinning Conditions, KOREAN JOURNAL OF METALS AND MATERIALS, 55권,4호, pp. 290~295, 2017
• 반응 용기법을 이용한 InP/ZnS 양자점 합성과정에서InP 코어의 성장기구, 한국분말야금학회지, 24권,1호, pp. 6~10, 2017
• Morphological, microstructural, and photoluminescence characterization of heterogeneous/homogeneous TeO2 nanostructures based on effect of different N-2 gas flow rates, JOURNAL OF ALLOYS AND COMPOUNDS, 695권, pp. 715~720, 2017
• Effect of alloying elements on pore characteristics of lotus-type porous Cu-X alloys (X = Ni, Co, Mn, Si, Sn, P), MATERIALS CHARACTERIZATION, 123권, pp. 99~105, 2017
• Evaluation of Dynamic Recrystallization Behaviors in Hot-Extruded AA5083 Through Hot Torsion Tests, METALS AND MATERIALS INTERNATIONAL, 23권,1호, pp. 68~75, 2017
• Physical properties of E-glass fiber according to fiberizing temperature, Korean Journal of Materials Research, 27권,1호, pp. 43~47, 2017
• Bonding Strength of Titanium Alloy Joints Brazed with Low-Melting-Temperature Zirconium Based Filler Metals, SCIENCE OF ADVANCED MATERIALS, 8권,12호, pp. 2286~2289, 2016
• High Temperature Deformation and Continuous Dynamic Recrystallization Behaviors of AA6082 using Processing Maps, KOREAN JOURNAL OF METALS AND MATERIALS, 54권,11호, pp. 793~801, 2016
• Mechanical Properties of a Tetrahedrally Cored Titanium Lattice Structure Fabricated by Pressure-Assisted Investment Casting, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 16권,11호, pp. 11214~11218, 2016
• Effects of Mg Enhancement and Heat Treatment on Microstructures and Tensile Properties of Al2Ca-Added ADC12 Die Casting Alloys, JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 32권,10호, pp. 1043~1048, 2016
• Enhanced H2S gas sensing performance of networked CuO-ZnO composite nanoparticle sensor, MATERIALS RESEARCH BULLETIN, 82권,SpecialSI, pp. 130~135, 2016
• Continuous dynamic recrystallization behavior and kinetics of Al-Mg-Si alloy modified with CaO-added Mg, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 673권, pp. 648~659, 2016
• Fabrication of Bi-doped In2O3-ITO nanocomposites and their photoluminescence properties, MATERIALS RESEARCH EXPRESS, 3권,9호, 2016
• 단락파형제어형 SMAW용 용접전원 개발 및 특성평가, 대한용접접합학회지, 34권,3호, pp. 40~46, 2016
• Ethanol Sensing Properties of Au-functionalized NiO Nanoparticles, BULLETIN OF THE KOREAN CHEMICAL SOCIETY, 37권,5호, pp. 713~719, 2016
• Effect of Mg Loss on Mechanical Properties of Electron-Beam-Welded Al5083, SCIENCE OF ADVANCED MATERIALS, 8권,4호, pp. 909~915, 2016
• Evaporation Properties of Oxide Dispersion Strengthened Pt-Au Alloys, SCIENCE OF ADVANCED MATERIALS, 8권,4호, pp. 916~921, 2016
• Fabrication of Ag-SnO2 Contact Materials from Gas-Atomized Ag-Sn Powder Using Combined Oxidation and Ball-Milling Process, INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 13권,2호, pp. 258~264, 2016
• 합금원소 첨가에 따른 다공성 동의 기공특성, 동기술연구회지, 31권,1호, pp. 59~64, 2016
• ZnO-core/ZnSe-shell nanowire UV photodetector, JOURNAL OF ALLOYS AND COMPOUNDS, 658권, pp. 459~464, 2016
• Hydrogen Gas Sensing of Co3O4-Decorated WO3 Nanowires, METALS AND MATERIALS INTERNATIONAL, 22권,1호, pp. 156~162, 2016
• 지르코니아 함량에 따른 내알칼리 유리섬유의 특성, 한국결정성장학회지, 25권,6호, pp. 263~271, 2015
• 로터스형 다공성 동의 항진균 특성, 동기술연구회지, 30권,2호, pp. 31~40, 2015
• Enhanced Gas Sensing Properties of Zn-Ni-O Nanoparticles, NANOSCIENCE AND NANOTECHNOLOGY LETTERS, 7권,9호, pp. 703~707, 2015
• Effect of Various Refinement Methods on the Morphologies of Primary Si in a Hypereutectic Al-18Si Alloy, MATERIALS TRANSACTIONS, 56권,8호, pp. 1269~1277, 2015
• 주석도금폐액으로부터 이온교환수지를 이용한 주석 회수, 자원리싸이클링, 24권,3호, pp. 51~58, 2015
• Enhanced acetone gas sensing performance of the multiple-networked Fe2O3-functionalized In2O3 nanowire sensor, CURRENT APPLIED PHYSICS, 15권,8호, pp. 947~952, 2015
• High Temperature Volatilization Property of Pt-4%Au-0.3%ZrO2, KOREAN JOURNAL OF METALS AND MATERIALS, 53권,5호, pp. 345~351, 2015
• Sol-gel 법을 이용한 내오염 반사방지 코팅막 제조, 한국재료학회지, 24권,12호, pp. 689~693, 2014
• Al2Ca를 함유한 A356 합금에서의 다양한 열처리 조건에 따른공정 Si 개량화 거동, 한국주조공학회지, 34권,5호, pp. 156~161, 2014
• ENHANCED ETHANOL SENSING PERFORMANCES OF MULTIPLE NETWORKED Nb2O5 NANOROD SENSORS FUNCTIONALIZED WITH Pd AND Au NANOPARTICLES, NANO, 9권,8호, 2014
• Room temperature hydrogen sensing properties of multiple-networked Nb2O5-nanorod sensors decorated with Pd nanoparticles, JOURNAL OF THE KOREAN PHYSICAL SOCIETY, 65권,9호, pp. 1414~1418, 2014
• Mechanical alloying of platinum with 5% ZrO2 nanoparticles for glass making tools, TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 24권, pp. 99~105, 2014
• Corrosion Behavior and Bio-Compatibility of Lotus type Porous Stainless Steels, ZAIRYO-TO-KANKYO, 63권, pp. 365~370, 2014
• Mechanical Properties of Porous Titanium Structure Fabricated by Investment Casting with Pressurization/Depressurization System, KOREAN JOURNAL OF METALS AND MATERIALS, 52권,3호, pp. 203~209, 2014
• Antibacterial Characteristics of Lotus-Type Porous Copper, ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2013
• 사암계 석탄폐석을 활용한 E-glass fiber 조성의 유리 제조 및 특성, 한국결정성장학회지, 23권,4호, pp. 180~188, 2013
• Improved Corrosion Resistance and Thinner Alpha-Case Layer on Titanium Casting Using Al2O3-5Ti as Investment Material, MATERIALS TRANSACTIONS, 54권,8호, pp. 1308~1312, 2013
• 다공성 동의 항균 특성, 동기술연구회지, 28권,1호, pp. 22~27, 2013
• Fabrication and compressive properties of porous TiAl-Mn intermetallics by powder metallurgical route, METALS AND MATERIALS INTERNATIONAL, 19권,2호, pp. 159~162, 2013
• 붕소를 함유하지 않는 E-glass fiber의 제조 및 특성에 대한 연구, 한국결정성장학회지, 23권,1호, pp. 44~50, 2013
• Fabrication of Porous Titanium with Directional Pores for Biomedical Applications, MATERIALS TRANSACTIONS, 54권,2호, pp. 137~142, 2013
• A new fabrication method to improve metal matrix composite dispersibility, MATERIALS LETTERS, 89권, pp. 279~282, 2012
• Elevated temperature compression behaviors of lotus-type porous NiAl, INTERMETALLICS, 29권, pp. 27~34, 2012
• Centrifugal casting for unpressurized fabrication of lotus-type porous copper, MATERIALS LETTERS, SI, pp. 92~94, 2012
• LBL법에 의해 TiO2막이 코팅된 광촉매 글라스 비드 제조, 한국재료학회지, 22권,7호, pp. 379~383, 2012
• Ductility improvement of intermetallic compound NiAl by unidirectional pores, MATERIALS LETTERS, 74권, pp. 213~216, 2012
• Mechanical Properties of Forged Nimonic 80A Superalloy Fabricated by Vacuum Spray Casting, KOREAN JOURNAL OF METALS AND MATERIALS, 50권,4호, pp. 263~270, 2012
• Development of High Strength and High Conductivity Cu-Ag-Zr-Co Alloy, JOURNAL OF JAPAN RESEARCH INSTITUTE FOR ADVANCED COPPER-BASE MATERIALS AND TECHNOLOGIES, 50권, pp. 180~184, 2011
• 고융점 금속 다공성 벌크소재 기술, 한국분말야금학회지, 18권,2호, pp. 95~104, 2011
• 로터스 금속, 기계저널, 51권,1호, pp. 53~56, 2011
• Fabrication of Porous High-Purity Iron with Directional Pores by Continuous Zone Melting Technique, MATERIALS TRANSACTIONS, 51권,11호, pp. 2076~2079, 2010
• 고융점금속 다공성 벌크소재 기술, 재료마당, 23권,5호, pp. 22~30, 2010
• Fabrication of lotus-type porous carbon steel via continuous zone melting and its mechanical properties, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 524권,1-2, pp. 112~118, 2009
• Formation of unidirectional nanoporous structures in thickly anodized aluminum oxide layer, TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 19권, pp. 1013~1017, 2009
• In vivo osteocompatibility of lotus-type porous nickel-free stainless steel in rats, MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS, 29권,4호, pp. 1182~1190, 2009
• Fabrication of Lotus-Type Porous Al-Si Alloys Using the Continuous Casting Technique, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 40권, pp. 406~414, 2009
• Fabrication of Lotus-Type Porous Cobalt and Silicon through Decomposition of Moisture, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2호, pp. 438~443, 2009
• In vitro corrosion resistance of Lotus-type porous Ni-free stainless steels, JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, 19권,11호, pp. 3385~3397, 2008
• Magnetization process of lotus-type porous metals, JOURNAL OF APPLIED PHYSICS, 103권,9호, pp. 093539, 2008
• Fabrication and Properties of Porous Metals with Directional Pores, MATERIA JAPAN, 47권,4호, pp. 196~202, 2008
• Applications of Lotus-Type Porous Metal and Alloys for Aero Engine Components, JOURNAL OF HIGH TEMPERATURE SOCIETY, 34권,2호, pp. 66~73, 2008
• Fabrication of Lotus-type Metals using Continuous Casting Technique, JOURNAL OF HIGH TEMPERATURE SOCIETY, 34권,2호, pp. 38~44, 2008